dmesg - Intel Core i3 350M
microcode: microcode updated early to revision 0x11, date = 2018-05-08
Linux version 5.3.0-62-generic (buildd@lcy01-amd64-004) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #56~18.04.1-Ubuntu SMP Wed Jun 24 16:17:03 UTC 2020 (Ubuntu 5.3.0-62.56~18.04.1-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b7595fff] usable
BIOS-e820: [mem 0x00000000b7596000-0x00000000b75ddfff] ACPI NVS
BIOS-e820: [mem 0x00000000b75de000-0x00000000b75e8fff] ACPI data
BIOS-e820: [mem 0x00000000b75e9000-0x00000000b75ebfff] ACPI NVS
BIOS-e820: [mem 0x00000000b75ec000-0x00000000b7618fff] reserved
BIOS-e820: [mem 0x00000000b7619000-0x00000000b761afff] usable
BIOS-e820: [mem 0x00000000b761b000-0x00000000b7620fff] reserved
BIOS-e820: [mem 0x00000000b7621000-0x00000000b762afff] ACPI NVS
BIOS-e820: [mem 0x00000000b762b000-0x00000000b762bfff] reserved
BIOS-e820: [mem 0x00000000b762c000-0x00000000b762dfff] ACPI NVS
BIOS-e820: [mem 0x00000000b762e000-0x00000000b764dfff] reserved
BIOS-e820: [mem 0x00000000b764e000-0x00000000b764efff] ACPI NVS
BIOS-e820: [mem 0x00000000b764f000-0x00000000b7653fff] reserved
BIOS-e820: [mem 0x00000000b7654000-0x00000000b7696fff] ACPI NVS
BIOS-e820: [mem 0x00000000b7697000-0x00000000b77fffff] usable
BIOS-e820: [mem 0x00000000b9e00000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: MEDION E7214 /E7214 , BIOS 4.6.3 04/02/2010
tsc: Fast TSC calibration using PIT
tsc: Detected 2260.978 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0xb7800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0B8000000 mask FF8000000 uncachable
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 2944M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 256M num_reg: 3 lose cover RAM: 0G
found SMP MP-table at [mem 0x000fce90-0x000fce9f]
check: Scanning 1 areas for low memory corruption
BRK [0x20601000, 0x20601fff] PGTABLE
BRK [0x20602000, 0x20602fff] PGTABLE
BRK [0x20603000, 0x20603fff] PGTABLE
BRK [0x20604000, 0x20604fff] PGTABLE
BRK [0x20605000, 0x20605fff] PGTABLE
BRK [0x20606000, 0x20606fff] PGTABLE
BRK [0x20607000, 0x20607fff] PGTABLE
RAMDISK: [mem 0x2fc3d000-0x33e15fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0420 000024 (v03 MEDION)
ACPI: XSDT 0x00000000B75DE080 000054 (v01 MEDION MEDIONAG 01072009 AMI 00010013)
ACPI: FACP 0x00000000B75E84F8 0000F4 (v04 MEDION MEDIONAG 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B75DE168 00A389 (v02 MEDION MEDIONAG 00000009 INTL 20051117)
ACPI: FACS 0x00000000B7622F40 000040
ACPI: FACS 0x00000000B7622F80 000040
ACPI: APIC 0x00000000B75E85F0 000072 (v01 MEDION MEDIONAG 01072009 AMI 00010013)
ACPI: SSDT 0x00000000B75E8668 00014E (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000B75E87B8 00003C (v01 MEDION MEDIONAG 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000B75E87F8 000176 (v01 MEDION MEDIONAG 01072009 AMI 00010013)
ACPI: HPET 0x00000000B75E8970 000038 (v01 MEDION MEDIONAG 01072009 AMI. 00000003)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000b77fffff]
NODE_DATA(0) allocated [mem 0xb77d5000-0xb77fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000b77fffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000099fff]
node 0: [mem 0x0000000000100000-0x00000000b7595fff]
node 0: [mem 0x00000000b7619000-0x00000000b761afff]
node 0: [mem 0x00000000b7697000-0x00000000b77fffff]
Zeroed struct page in unavailable ranges: 2406 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000000b77fffff]
On node 0 totalpages: 751258
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 11680 pages used for memmap
DMA32 zone: 747265 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xba000000-0xbbffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb7596000-0xb75ddfff]
PM: Registered nosave memory: [mem 0xb75de000-0xb75e8fff]
PM: Registered nosave memory: [mem 0xb75e9000-0xb75ebfff]
PM: Registered nosave memory: [mem 0xb75ec000-0xb7618fff]
PM: Registered nosave memory: [mem 0xb761b000-0xb7620fff]
PM: Registered nosave memory: [mem 0xb7621000-0xb762afff]
PM: Registered nosave memory: [mem 0xb762b000-0xb762bfff]
PM: Registered nosave memory: [mem 0xb762c000-0xb762dfff]
PM: Registered nosave memory: [mem 0xb762e000-0xb764dfff]
PM: Registered nosave memory: [mem 0xb764e000-0xb764efff]
PM: Registered nosave memory: [mem 0xb764f000-0xb7653fff]
PM: Registered nosave memory: [mem 0xb7654000-0xb7696fff]
[mem 0xbc000000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 739493
Policy zone: DMA32
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2850356K/3005032K available (14339K kernel code, 2369K rwdata, 4672K rodata, 2664K init, 5072K bss, 154676K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43329 entries in 170 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2097369846b, max_idle_ns: 440795317578 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.95 BogoMIPS (lpj=9043912)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x2)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
MDS CPU bug present and SMT on, data leak possible. See for more details.
#3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (18087.82 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xb7596000-0xb75ddfff] (294912 bytes)
PM: Registering ACPI NVS region [mem 0xb75e9000-0xb75ebfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xb7621000-0xb762afff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xb762c000-0xb762dfff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xb764e000-0xb764efff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb7654000-0xb7696fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:41:46, date: 2020-07-06
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594053706.140:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8A13B2D39800 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 13 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfac00000-0xfaffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbc09000-0xfbc0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbc08000-0xfbc083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbc07000-0xfbc073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbc06000-0xfbc067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbc05000-0xfbc050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbc04000-0xfbc04fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03-05]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfb000000-0xfb9fffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
pci 0000:06:00.0: [1969:1063] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfbb00000-0xfbb3ffff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:00.0: [10ec:8172] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:07:00.0: reg 0x14: [mem 0xfba00000-0xfba03fff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci_bus 0000:08: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xb7596000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb761b000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xff800000-0xff800fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN0323 SYN0300 SYN0002 PNP0f13 (active)
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x1180-0x119f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc1fffff]
pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-05]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfb000000-0xfb9fffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.4: PCI bridge to [bus 07]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbc000000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbc1fffff]
pci_bus 0000:02: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb000000-0xfb9fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0xbc000000-0xffffffff window]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 28402 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 27308 usecs
pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
pci 0000:06:00.0: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 67428K
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 24
pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
pcieport 0000:00:1c.4: PME: Signaling with IRQ 28
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 4032k, total 4032k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (54 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (49 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbc08000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbc07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x20652, pf=0x10, revision=0x11
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1785869341, 289191)->(1793500709, -7342177)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5b6b7609e44461836628aa165e1ec77cc1a3cfd6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:286:691
rtc_cmos 00:01: setting system clock to 2020-07-06T16:41:48 UTC (1594053708)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
random: fast init done
battery: ACPI: Battery Slot [BAT0] (battery present)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2664K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1472K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.3: new full-speed USB device number 3 using ehci-pci
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
atl1c 0000:06:00.0: version 1.0.1.1-NAPI
atl1c 0000:06:00.0 enp6s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06380 irq 29
pci 0000:00:00.0: Intel HD Graphics Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 32768K stolen memory
checking generic (e0000000 3f0000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from VESA VGA
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
tsc: Refined TSC clocksource calibration: 2260.984 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20973c4cbd4, max_idle_ns: 440795293526 ns
clocksource: Switched to clocksource tsc
usb 2-1.3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.3: Product: CSR8510 A10
[drm] RC6 disabled, disabling runtime PM support
[drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:4d: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
fbcon: i915drmfb (fb0) is primary device
fbcon: Deferring console take-over
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20090516388200000
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ums-realtek 1-1.4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.4:1.0
usbcore: registered new interface driver ums-realtek
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: ATA-9: TCSUNBOW X3 60GB, Q0707A, max UDMA/133
ata2.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 C64G PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA TCSUNBOW X3 60GB 7A PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ata5.00: ATAPI: TSSTcorp CDDVDW SN-S083C, SB01, max UDMA/100
ata5.00: applying bridge limits
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S083C SB01 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
psmouse serio1: synaptics: queried max coordinates: x [..5628], y [..4928]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 574148
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
raid6: sse2x4 gen() 7395 MB/s
raid6: sse2x4 xor() 5367 MB/s
raid6: sse2x2 gen() 6579 MB/s
raid6: sse2x2 xor() 4933 MB/s
raid6: sse2x1 gen() 5523 MB/s
raid6: sse2x1 xor() 4229 MB/s
raid6: using algorithm sse2x4 gen() 7395 MB/s
raid6: .... xor() 5367 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11627.000 MB/sec
generic_sse: 9969.000 MB/sec
xor: using function: prefetch64-sse (11627.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[453]: Received request to flush runtime journal from PID 1
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
acer_wmi: Acer Laptop ACPI-WMI Extras
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Adding 500732k swap on /dev/sdb2. Priority:-2 extents:1 across:500732k SSFS
usbcore: registered new interface driver btusb
rtl8192se: FW Power Save off (module option)
rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtl8192se 0000:07:00.0 wlp7s0: renamed from wlan0
gpio_ich gpio_ich.2.auto: GPIO from 436 to 511
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Adding 8787964k swap on /dev/sda1. Priority:-3 extents:1 across:8787964k FS
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC663: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1594053714.910:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=732 comm="apparmor_parser"
audit: type=1400 audit(1594053714.910:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=732 comm="apparmor_parser"
audit: type=1400 audit(1594053714.910:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=732 comm="apparmor_parser"
audit: type=1400 audit(1594053714.950:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=742 comm="apparmor_parser"
audit: type=1400 audit(1594053715.026:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=746 comm="apparmor_parser"
audit: type=1400 audit(1594053715.182:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=730 comm="apparmor_parser"
audit: type=1400 audit(1594053715.186:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=730 comm="apparmor_parser"
audit: type=1400 audit(1594053715.186:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=730 comm="apparmor_parser"
audit: type=1400 audit(1594053715.186:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=730 comm="apparmor_parser"
audit: type=1400 audit(1594053715.254:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=748 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
wlp7s0: authenticate with 2c:30:33:2b:a9:b8
wlp7s0: send auth to 2c:30:33:2b:a9:b8 (try 1/3)
wlp7s0: authenticated
wlp7s0: associate with 2c:30:33:2b:a9:b8 (try 1/3)
wlp7s0: RX AssocResp from 2c:30:33:2b:a9:b8 (capab=0x431 status=0 aid=1)
rtl8192se: switch case 0x5e not processed
wlp7s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3142 > 3132), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3943 > 3927), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4934 > 4928), lowering kernel.perf_event_max_sample_rate to 40500
perf: interrupt took too long (6168 > 6167), lowering kernel.perf_event_max_sample_rate to 32250